For use on all types of concrete and plaster substrates, plasterboards and OSB boards. Suitable for all types of ceramic and porcelain tiles including mosaic. Not recommended for pools.

Surface should be firm, dry and even. Once the substrate is too absorbent or dusty should be primed with universal polymer primer (for example OSB board).

Mix the package content with 6-6,5 liters of clean cool water (240-260 ml for each 1 kg of powder), stir until smooth paste. Leave for 5-10 minutes and re-stir.

Clean and dry dusty tiles before installation. Apply a thin layer of adhesive on substrate and tile surface, and then spread the adhesive on the substrate with notched trowel. Install the tile within 20 min from mix application, after that time adhesive should be reapplied to avoid lower connection parameters. When installing do not wet applied adhesive or tiles. Application temperature should be from +5°C to +30°C. Tiles should not be applied in the strong sun.

Limited movement is allowed after 24h. Grouting time is 24h for floors and 12h for wall, from installation. Within a week from installation tiles should be protected from strong sun and frost.